Products: Motorized Potentiometers

Motorized potentiometers and cam timers are used in a variety of industrial automation and process control applications. They are simple to set-up. Easy to operate. No computers required. No software to write. Easy to maintain. Never obsolete. Micronor offers a wide range of configurations and options. Motor pots are made-to-order and typically 2-3 weeks ARO (expediting available). Options include:

1-turn and 10-turn configurations

Single or multiple potentiometers

Mounting options include DIN rail, front panel and chassis mount

Timing cycle options from 5 seconds to 24 hours

Potentiometer power capacities range from 2W to 1000W (including rheostats)

Motor options: AC (24, 48, 110 or 220VAC) DC (12 or 24V)

Limit switch options from 0 to 24 channels

Choice of single cam or fully programmable double cams

MR267/MR268 series offer choice of 4-20mA or 0-10V remote control and feedback

PRSG option offers a wide adjustable speed range and quick stopping feature

Contact Dennis Horwitz at Micronor Inc. at (805) 499-0114 to discuss your special motor pot/cam timer requirements

NK NP NV Series \| Cam Options
	These cams are the most common options offered on Micronor motorized potentiometers, cam timers and rotary limit switches: NK series are DEFAULT Standand on all Micronor products NP series OPTION use removeable clips to program multiple On-Off cycles NV cams OPTION feature an internal worm gear for fine and precise adjustments. This is the default cam for all Micron replacement feedback units.
	Downloads: datasheet \| manual \| drawing \| image \| \|


<<previous \| next >>

MPC MPF MPP MPR \| General Purpose 1-Turn Motor Pots
	Most general purpose and popular of all Micronor motorized potentiometers. Can accomodate multiple potentiometers as well as multiple cam switches. MPP is most popular model, DIN rail or chassis mount MPR is DIN rail, end mount MPF is front panel mount MPC in protective housing with see-thru cover MPPD is DIN rail mount and offers 2 timing cycles (Program execution and Return To Zero) See MR267 series for models with built-in 4-20mA or 0-10V remote control interface or feedback
	Downloads: datasheet \| manual \| drawing \| image \| \|

MPPS \| Special Purpose High Wattage (20-1000W) Motor Pot
	MPPS series are special purpose 1 Turn motorized potentiometers for high wattage applications. Up to 2 potentiometers or rheostats rated from 20 to 1000 Watts See MR268 series for high wattage models with built-in 4-20mA or 0-10V remote control interface or feedback Contact Dennis Horwitz at Micronor Inc. to discuss motorized rheostat solutions for applications exceeding 170 watts.
	Downloads: datasheet \| manual \| drawing \| image \| \|

MPZ MPRZ MPZD \| 10-Turn Motorized Potentiometers
	Versatile 10-turn motorized potentiometers where extra resolution is required. Can accomodate up to 2 potentiometers as well as multiple cam switches. MPZ is most popular 10-turn model, DIN rail or chassis mount MPRZ is DIN rail, end mount MPZD features dual timing cycle (Program execution and Return To Zero) See MR267 series for motor pots with 4-20mA or 0-10V remote control interfaces
	Downloads: datasheet \| manual \| drawing \| image \| \|

MR267 \| Motor Pots with 4-20mA or 0-10V Remote Control Interface
	MR267 series motor pots allow the straightforward automation upgrade of manual potentiometer controls (up to 5W) to PLC control via 4-20mA or 0-10V input/ouput. Mounting styles: Front panel or DIN Rail Combinations of 4-20mA or 0-10V input and/or output are available, plus isolated or non-isolated interfaces 24 VDC operation User adjustable speed of 6-120s, preset to 10s Quick connections via PHOENIX CombiCon wiring plug For potentiometer/rheostat replacements exceeding 5 Watts, please consult MR268 series (data sheet coming soon) - or contact Micronor directly.
	Downloads: datasheet \| manual \| drawing \| image \| \|