900 Calle Plano, Suite K, Camarillo, CA 93012 USA
Tel: 805.389.6600 | Fax: 805.389.6605 | Email: sales@micronor.com

   
Potentiometers - Motorized
Page 1 / 1
Motorized potentiometers are used in a variety of industrial automation and process control applications. They are simple to set-up. Easy to operate. No computers required. No software to write. Easy to maintain. Never obsolete. Micronor offers a wide range of configurations and options. Options include:
  • Control options are either Direct (Motor) Drive or Analog Input (4-20mA or 0-10V)
  • 1-turn or 10-turn models available
  • Available with single or multiple potentiometers
  • Mounting options include DIN rail, front panel and chassis mount
  • Timing cycle options from 10 seconds to 24 hours
  • Potentiometer power capacities range from 2W to 1000W (including rheostats)
  • DIRECT DRIVE motor options: AC (24, 48, 110 or 220VAC) DC (12 or 24V)
  • Limit switch options from 0 to 24 channels
  • Choice of single cam or fully programmable double cams

    Click here for How To Select A Motorized Potentiometer

    Recommendations for low wattage (<5W) applications:

  • For 1-turn Direct Drive applications, use either front panel-mount MPF or DIN rail-mount MPP
  • For 10-turn Direct Drive applications, use either front panel-mount or DIN rail-mount MPZ
  • For Analog Input control, use MR267

    Recommendations for high wattage (20W-1000W) potentiometer or rheostat applications:

  • For Direct Drive applications, use MPPS
  • For Analog Input control, use MR266

    Contact Micronor sales at (805) 499-0114 or dennis@micronor.com to discuss your special motor pot requirements.

  •  

     
    MPC | Single Turn Motorized Potentiometer, DIN Rail Mount, Protective Housing
    Direct drive, single turn motor pot with following features:
  • DIN rail mount
  • Resistances: 100Ω to 100KΩ, 5 Watts
  • Timing Options: 10s to 120s
  • Motor options: 12 VDC, 24 VDC, 24 VAC, 48 VAC, 110 VAC, 220 VAC
  • Downloads: datasheet | manual | drawing | image
     
    MPF | Single Turn Motorized Potentiometer, Front Panel Mount
    Direct drive, single turn motor pot with following features:
  • Front panel mount
  • 1-2 potentiometers
  • Resistances: 100Ω to 100KΩ, 5 Watts
  • Timing Options: 10s to 120s
  • Motor options: 12 VDC, 24 VDC, 24 VAC, 48 VAC, 110 VAC, 220 VAC
  • Downloads: datasheet | manual | drawing | image
     
    MPP | Single Turn Motorized Potentiometer, DIN Rail Side Mount
    Direct drive, single turn motor pot with following features:
  • DIN rail mount
  • 1-5 potentiometers
  • Resistances: 100Ω to 100KΩ, 5 Watts
  • Timing Options: 10s to 120s
  • Motor options: 12 VDC, 24 VDC, 24 VAC, 48 VAC, 110 VAC, 220 VAC
  • Downloads: datasheet | manual | drawing | image
     
    MPPS | High Wattage (20-1000W) Motorized Potentiometers/Rheostats
    MPPS series are special purpose 1 Turn motorized potentiometers for high wattage applications.
  • Up to 2 potentiometers or rheostats rated from 20 to 1000 Watts
  • See MR266 Series for high wattage models with built-in 4-20mA or 0-10V remote control interface or feedback
  • Contact Dennis Horwitz at Micronor Inc. to discuss special solutions for applications exceeding 170 watts.
  • Downloads: datasheet | manual | drawing | image
     
    MPR | Single Turn Motorized Potentiometer, DIN Rail End Mount
    Direct drive, single turn motor pot with following features:
  • DIN rail mount
  • 1-2 potentiometers
  • Resistances: 100Ω to 100KΩ, 5 Watts
  • Timing Options: 10s to 120s
  • Motor options: 12 VDC, 24 VDC, 24 VAC, 48 VAC, 110 VAC, 220 VAC
  • Downloads: datasheet | manual | drawing | image
     
    MPRZ | 10 Turn Motorized Potentiometer, DIN Rail End Mount
    Direct drive, 10 turn motor pot with following features:
  • 1-3 potentiometers
  • Resistances: 100Ω to 50KΩ, 2 Watts
  • Timing Options: 20s to 180s
  • Motor options: 12 VDC, 24 VDC, 24 VAC, 48 VAC, 110 VAC, 220 VAC
  • Downloads: datasheet | manual | drawing | image
     
    MPZ | 10 Turn Motorized Potentiometer, DIN Rail Side Mount
    Direct drive, 10 turn motor pot with following features:
  • 1-3 potentiometers
  • Resistances: 100Ω to 50KΩ, 2 Watts
  • Timing Options: 20s to 180s
  • Motor options: 12 VDC, 24 VDC, 24 VAC, 48 VAC, 110 VAC, 220 VAC
  • Downloads: datasheet | manual | drawing | image
     
    MR266 | Motorized Rheostat (20W-1000W) with 4-20mA or 0-10V Remote Control
    MR266 series allow direct upgrade of manual rheostat or potentiometer controls (20-300W) to PLC or DCS control via 4-20mA or 0-10V input/output. Also an optional Front Panel Mount Potentiometer Control accessory allows high power units to be conveniently relocated from control panel to a control/equipment cabinet where high voltage/high current electrical connections and heat dissipation issues can be more optimally addressed.
  • DIN Rail Mount
  • Standard non-isolated or special isolated 1kV) interface option
  • 24 VDC operation
  • User adjustable 0-100% timing cycle of 10-120s, preset to 10s
  • Quick connections via PHOENIX CombiCon wiring plug
  • For applications >600 Watts, contact Micronor sales at +1-805-389-6600 or dennis@micronor.com for assistance
  • Downloads: datasheet | manual | drawing | image
     
    MR267 | Motorized Potentiometer (<5W) with 4-20mA or 0-10V Remote Control Interface
    MR267 series allow direct upgrade of manual potentiometer control (up to 5W) to PLC or DCS control via 4-20mA or 0-10V input/ouput.
  • Mounting styles: Front panel or DIN Rail
  • Standard non-isolated or special isolated (1kV) interface
  • 24 VDC operation
  • User adjustable speed of 6-120s, preset to 10s
  • Quick connections via PHOENIX CombiCon wiring plug
  • Multiple ganged pots also available, contact Micronor sales for assistance
  • For replacing potentiometer >5 Watts, see MR266 Series

    Typical lead time for small quantities is 2-3 days.

  • Downloads: datasheet | manual | drawing | image
     
    NK NP NV NF | Cam Options
    These cams are the most common options offered on Micronor motorized potentiometers, cam timers and rotary limit switches:
  • NF cams are non-adjustable single cam disks with fixed milled program
  • NK series are the standard settable single cam or fully-programmable double cams found on most Micronor products
  • NP series cams are programmed via clips for single or multi-event switching per cycle
  • NV precision cams feature an internal worm gear for fine and precise adjustments. This is the default cam for all Micron replacement feedback units.
  • Downloads: datasheet | manual | drawing | image
     

     

     

     

    ©2006-2014 MICRONOR INC.